spectrum+ hybrid Specifications
75 x 75 x 2.5mm galvanised RHS with powder coat finish.
Upgraded to 75 x 75 x 3.0mm in high load locations.
120 x 35mm (nominal) White Cypress, sawn finish, corners radiused and fully screwed.
125 x 60mm sawn White Cypress with corners radiused.
Natural White Cypress or ‘Quantum Timbre Plus’ coating available for visual enhancement.
Powder coated galvanised sheet steel, corrugated steel sheeting or rotomoulded plastic as specified.
900mm high guardrail panels on platforms over 500mm.
Powder coated galvanised steel tube, sawn White Cypress or HDPE plastic panels as specified.
27mm O/D galvanised steel tube with powder coat finish.
Supplied at climbing access points as appropriate.
Access ladders include 27mm O/D handgrip integrated in ladder side.
34mm O/D galvanised steel tube with powder coat finish.
Fabricated from galvanised steel, welds treated with zinc rich primer – powder coat finish.
Heavy duty reinforced fibreglass, rotomoulded plastic or stainless steel as specified.
Powder coated galvanised steel tube with end panels.
Rotomoulded plastic beads or HDPE plastic sheet panels as appropriate.
Synthetic strands braided over a galvanised steel wire core.
Trilobial taptite bolts, cup head bolts, recessed safety nuts, screws – vandal resistant with galvanised/class 3 finish.
Concrete to a minimum depth of 500mm with earth hard packed to mouth of hole.